Mechanistic Aspects of a Highly Active Dinuclear Zinc Catalyst for the Co‐polymerization of Epoxides and CO2

The dinuclear zinc complex reported by us is to date the most active zinc catalyst for the co‐polymerization of cyclohexene oxide (CHO) and carbon dioxide. However, co‐polymerization experiments with propylene oxide (PO) and CO₂ revealed surprisingly low conversions. Within this work, we focused on clarification of this behavior through experimental results and quantum chemical studies. The combination of both results indicated the formation of an energetically highly stable intermediate in the presence of propylene oxide and carbon dioxide. A similar species in the case of cyclohexene oxide/CO₂ co‐polymerization was not stable enough to deactivate the catalyst due to steric repulsion.     

Universal power law behavior of the AC conductivity versus frequency of agglomerate morphologies in conductive carbon nanotube‐reinforced epoxy networks

The Jonscher universal power law for ac conductivity versus frequency (f = ω/2π) in the dispersion region was tested for a multiwall carbon nanotube/epoxy nanocomposite. The effect of changes in agglomerate morphology on the fitting parameters A and n in the equation σ_{ac =} Aωⁿ was investigated. Changing nanotube agglomerate morphology was tracked by optical microscopy through curing. Evolving morphology was compared alongside ac conductivity obtained via a broadband dielectric spectrometer to elucidate possible physical meaning of the universal power law in the context of this system. The ?logA/n was unaffected by changes in agglomerate morphology affected during cure, yet connected with each other in their dependence on temperature. For this system, the relationship between the fitting parameters in the universal dynamic response equation remains empirical at this stage with regard to biphasic “texture” or morphology within such a network. Electrical conductivity σ versus frequency ω for a composite consisting of agglomerated multiwalled carbon nanotubes dispersed throughout a cured epoxy matrix was discovered to follow the empirical universal dynamic response equation of Jonscher. The frequency behavior of the exponent n is discussed in terms of underlying morphology throughout which charge carriers migrate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1918–1923     

Hierarchically Designed Three‐Dimensional Macro/Mesoporous Carbon Frameworks for Advanced Electrochemical Capacitance Storage

Mesoporous carbon (m‐C) has potential applications as porous electrodes for electrochemical energy storage, but its applications have been severely limited by the inherent fragility and low electrical conductivity. A rational strategy is presented to construct m‐C into hierarchical porous structures with high flexibility by using a carbon nanotube (CNT) sponge as a three‐dimensional template, and grafting Pt nanoparticles at the m‐C surface. This method involves several controllable steps including solution deposition of a mesoporous silica (m‐SiO₂) layer onto CNTs, chemical vapor deposition of acetylene, and etching of m‐SiO₂, resulting in a CNT@m‐C core–shell or a CNT@m‐C@Pt core–shell hybrid structure after Pt adsorption. The underlying CNT network provides a robust yet flexible support and a high electrical conductivity, whereas the m‐C provides large surface area, and the Pt nanoparticles improves interfacial electron and ion diffusion. Consequently, specific capacitances of 203 and 311 F g^?1 have been achieved in these CNT@m‐C and CNT@m‐C@Pt sponges as supercapacitor electrodes, respectively, which can retain 96 % of original capacitance under large degree compression.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

Preparation and Characterization of Bhant Leaves‐derived Nitrogen‐doped Carbon and its Use as an Electrocatalyst for Detecting Ketoconazole

In this study, the electrocatalytic characteristics of nitrogen‐doped carbon (NDC) prepared from Clerodendrum Infortunatum L leaves on a glassy carbon electrode (GCE) surface was evaluated with regards to its ability to detect the electroactive drug ketoconazole (KCZ). The NDC was prepared by carrying out a simple pyrolysis of dry powder of the leaves at 850 °C. The prepared NDC was characterized using field‐emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and Brunauer‐Emmett‐Teller analysis, and was then used as an electrode material. The performance of the electrochemical KCZ sensor with the NDC‐modified glassy carbon electrode (NDC/GCE) was found to be optimal when using PBS buffer at pH 3 and a concentration of 0.1 mg/ml of NDC in the conjugate with Nafion polymer. Under these conditions, the NDC/GCE displayed a KCZ detection limit of 3 μM and a linear dependence of its response on KCZ concentration over a wide range of KCZ concentrations from 47 μM to 752 μM (R²=0.9742). These results confirmed the potential of NDC as an electrocatalyst.     

Solvothermal modification of graphitic C3N4 with Ni and Co phthalocyanines: Structural,optoelectronic and surface properties

Nanocomposites for photocatalytic applications were obtained by alchothermal modification of g-C₃N₄ with cobalt(ii) and nickel(ii) phthalocyanine complexes. The nanocomposites demonstrated higher photocatalytic activity than the bare matrix and stability under actinic irradiation. In the optoelectronic structure of the composites, the E_g value of the g-C₃N₄ matrix increased to 3.05 eV, while for MPc agents, it decreased from 1.96 to 1.82 eV.     

Carbon-Based Materials as Lithium Hosts for Lithium Batteries

Lithium (Li) metal has attracted significant attention in areas that range from basic research to various commercial applications due to its high theoretical specific capacity (3860 mA h g⁻¹) and low electrochemical potential (−3.04 vs. standard hydrogen electrode). However, dendrites often form on the surfaces of Li metal anodes during cycling and thus lead to battery failure and, in some cases, raise safety concerns. To overcome this problem, a variety of approaches that vary the electrolyte, membrane, and/or anode have been proposed. Among these efforts, the use of three-dimensional frameworks as Li hosts, which can homogenize and minimize the current density at the anode surface, is an effective approach to suppress the formation of Li dendrites. Herein, we describe the development of using carbon-based materials as Li hosts. While these materials can be fabricated into a variety of porous structures, they have a number of intrinsic advantages including low costs, high specific surface areas, high electrical conductivities, and wide electrochemical stabilities. After briefly summarizing the formation mechanisms of Li dendrites, various methods for controlling structural and surface chemistry will be described for different types of carbon-based materials from the viewpoint of improving their performance as Li hosts. Finally, we provide perspective on the future development of Li host materials needed to meet the requirements for their use in flexible and wearable devices and other contemporary energy storage techniques.     

Nanosized Carbon Macrocycles Based on a Planar Chiral Pseudo Meta-[2.2]Paracyclophane

Structural designs combining cycloparaphenylenes (CPPs) backbone with planar chiral [2.2]paracyclophane ([2.2]PCP) lead to optical-active chiral macrocycles with intriguing properties. X-ray crystal analysis revealed aesthetic necklace-shaped structures and size-dependent packages with long-range channels. The macrocycles exhibit unique photophysical properties with high fluorescence quantum yield of up to 82 %, and the fluorescent color varies with ring size. In addition, size-dependent chiroptical properties with moderately large CPL dissymmetry factor of 10⁻³ and CPL brightness in the range of 30–40 M⁻¹ cm⁻¹ were observed.